
Exsulite. The Dulux facade, end to end.
A blue flame-retardant EPS panel over a drained cavity, finished with the Dulux Acratex coating stack. One brand from board to topcoat, with the Dulux Trade Centre network behind it.
- Panel2400 × 1200 mm, blue M-grade EPS
- Thickness60, 75 and 100 mm
- SystemsCavity on EPS or pine battens or metal top hats; non-cavity direct fix
- WindN1–N4; ULS to 5.5 kPa with denser fixing
- BushfireBAL-29 to AS 3959:2018
- ThermalTotal wall R3.45–4.99 with R2.0 batts
- ClassesNCC Class 1 and 10
- CertificationCodeMark CM40264 cavity, CMI Certification; CM40266 non-cavity
- CoatingsAcraPro basecoat, Acratex texture, AcraShield topcoat
- WarrantySystem warranty via certificate of installation; coating 7, 10 or 15 years
What it is
Exsulite is Dulux Acratex's thermal facade system: a fire-retardant EPS panel screwed over a drained cavity, meshed and basecoated with AcraPro, textured from the Acratex range and sealed with AcraShield. The composite version arrives with the basecoat already on, so site mesh drops to 200 mm strips at the joints.
Builders choose it for the brand. The same company makes the panel, the render and the paint, publishes one manual for all of it and warrants the coating stack by the number of topcoats.
System build-up
- Exsulite breathable wrap, aluminium-bitumen flashing tape at every opening and penetration
- Vertical EPS or H3 pine battens, or horizontal metal top hats, forming a 15 to 35 mm drained cavity
- Pre-coated EPS starter pieces or a starter channel with weep holes at the base, sills at 15 degrees
- Panels in horizontal stagger bond, PU foam on every edge, 40 mm discs and TRIGARD screws at 25 per panel
- AcraPro P400 basecoat at 5 mm with 165 g mesh, 4.8 mm minimum for BAL
- Acratex texture (Coventry, Tuscany, Sienna, PowerFinish and others) and AcraShield topcoat, mandatory within 1 km of the coast
Where it fits
Projects specified through Dulux, display villages and builders whose colour schedule already runs on Acratex. Coastal lots, where the AcraShield membrane is part of the system rather than an extra. Any Class 1 house where the owner wants a single warranty holder for the whole facade.
Limits to design around
Class 1 and 10 only, N1 to N4, no cyclonic regions and no walls that need an FRL, including boundary walls. The 60 mm panel is limited to 450 mm stud centres on the non-cavity system. Control joints at 6 m horizontally and 3 m vertically, at openings and floor levels. Surfaces stay below 80 degrees with heat sources 1.5 m away. Frame tolerance is 4 mm over 2 m: the panel will not straighten a bad frame.
Certification and evidence.
What the certificate covers, and what we hand over to prove the installation matches it.
The cavity system holds CodeMark CM40264 Rev 2 from CMI Certification against NCC 2022 Volume Two, covering structure to AS 4055 N4, weatherproofing verified to AS/NZS 4284, rising damp, BAL-29 and energy efficiency. The non-cavity system is referenced as CM40266. Certification requires a state-licensed cladding installer and installation to the November 2025 manual and July 2023 construction drawings.
We lodge the Exsulite Certificate of Installation and Workmanship with Dulux at completion, which activates the system warranty, and register the Acratex coating warranty with proof of purchase. Certificate currency is checked at quote stage because this certificate renews annually.
How we fix and render it.


Reveals set 65 or 90 mm proud to suit the panel and batten. Battens to every stud, around openings and above roof flashings. Panels cut outdoors with a vacuum-extracted diamond blade, no grinders. Screws just countersunk, never overdriven, and never past the batten line. Joints foamed, trimmed and sanded flush, corners rasped plumb with a 3.5 mm bead. Basecoat applied wet-in-wet over the mesh to 5 mm, scratch keyed, then texture and topcoat with sealant between them. Nothing goes on in rain, over 30 degrees in the afternoon or when nights drop below 10.
Warranty and maintenance
The Exsulite system warranty applies once the signed certificate of installation is lodged. The Dulux Acratex coating warranty runs seven years for basecoat and texture, ten with one AcraShield coat and fifteen with two. Maintenance is an annual wash at low pressure, six-monthly on the coast, sealant and joint inspection, and a membrane recoat within ten years. We give every owner the Dulux care guide at handover.
Manufacturer documents.
Linked to the manufacturer's own hosting so you always get the current revision. Our own guides are on the resources page.
Basroc
Non-combustible, fire-rated to 90/90/90, BAL-FZ, silica-free. The substrate for boundary walls, fire-separation zones and anything that needs an FRL.
System page →CSR Hebel
Solid steel-reinforced aerated concrete on top hats. Non-combustible, FRL to 180/180/180, BAL-FZ, cyclonic to C3 and a 20-year CSR warranty. The masonry feel without the bricklayer.
System page →Sto
The German EIFS pedigree, delivered in Australia through Sto Australia. Specified where the project calls for the Sto system and the StoWarranty.
System page →Unitex
Australia's original EIFS. Cavity and non-cavity CodeMarks, and the only EPS system in this set with a BAL-40 pathway.
System page →NRG Greenboard
Made at Yatala, stocked everywhere in South East Queensland, CodeMark-certified for Class 1 and 10 and the value option for volume housing.
System page →